V-Block ( Melamine) Acoustic Material – Soundproofing Foam

These 1’ X 1’ cubes are V cut from our MELAMINE foam with 3-V tapered pattern are ideal for low bass, anechoic or impact sound test locations where high heat and temperature levels are found.

Installation Instructions:  Most customers glue these panels to a wall using silicone based caulk. For portability, you could opt to put them up with velcro strips or double stick tape. Cut the foam from the back side with a carpet cutter or utility knife.

The standard installation consists of adhering the V-Blocks directly to a wall surface with standard silicone adhesive. To maximize the effects of the foam, customers have mounted the Sound Blocks to plywood, and attached the plywood to firring strips linings the chamber walls. This creates a dead air space behind the foam. For treating transmission (keeping outside noise out, and inside noise in) see our Noise Control Vinyl Sound Barrier material. This could be adhered to the chamber walls prior to installing the foam.

 

FREQUENCY (Hz)
125
250
500
1K
2K
4K
NRC
Soundproofing Foam V-Block
Soundproofing Foam V-Block
Soundproofing Foam V-Block
Soundproofing Foam V-Block
Soundproofing Foam V-Block
Soundproofing Foam V-Block
Soundproofing Foam V-Block
ANC-60m .27 1.05 1.34 1.28 1.26 1.17 1.25
ANC-80m .41 1.05 1.42 1.36 1.37 1.51 1.30

V-Block Foams / V-Block Melamine Acoustic Foam Material ideal for low bass, anechoic or impact sound test locations where high heat and temperature levels are found

Acoustic Applications
  • Anechoic Sound Test Chambers
  • Impact Noise Sources (Punch Press)
  • Low Bass Noise Sources
  • Sound Testing Facilities
  • Industrial Noise Sources

Need technical assistance? Contact us here….