All Noise Control Soundproofing Materials Website
Soundproofing and Noise Control Products
All Noise Control Home Page Link Contact All Noise Control About All Noise Control Contact All Noise Control for a Quote
Blog ntrol by Product Noise Control by Application
All Noise Control Resources & Acoustic Education
All Noise Control Resources & Acoustic Education
Choose either Noise Barrier Products or Noise Absorption Products Below
Outdoor Noise Control Industrial Noise control
Sound damping

Call us today at 1-561-964-9360

Sound Barrier

Noise Control Panels

Noise Absorption

Question? Fill out our contact form for more information or a call back!

All Noise Control Soundamp E asphalt based vibration damping sheets



Sound damping sheets is a bitumen-based, self-adhesive sheet used for sound and vibration damping on metal panels.  The adhesive side is smooth, giving complete contact with the underlying surface without air pockets or channels.  Soundamp E is odorless, wear-resistant and impregnated to prevent the absorption of water.  Both pad material and adhesive can withstand temperatures between -30° C and +120° C (-22° F to +248 ° F) and are highly resistant to aging.

  • Meets FMVSS 302 and UL94 HBF
  • Resistant to water and mineral oils
  • Improves fatigue life and safety factor of treated surfaces
  • High acoustic loss factor
  • Non-hazardous & non-toxic

Sounddamp E Specs click here



Typical applications include metal partitions, ducts, transportation industry, and office machines as well as numerous architectural applications. SoundampE is easily handled, and may be cut with scissors, utility knife, or die. SoundampE should be cut into the desired shape before the backing paper is removed.  The temperature of the pad and application surface should not be below room temperature during fitting.


Typical properties


Thickness                    1.95 mm (0.080”)
Weight                          1.6 kg/m2 (0.33 lbs/sq.ft.)
Chemical resistance     resistant to water and mineral oils
Thermal conductivity    (l) –0.11 W/m  K(0.76 BTU-in/ft2h x °F)
Storage life                    6 months max.
Storage instructions    the material must be stored horizontally in its wrapping
Fire Classification       Meets FMVSS 302 and is approved to UL94 HBF
Temperature Range     -22°F to 248°F
Thermal Conductivity   0.76 BTU/ in/ ft2/ Hr./ °F
Loss Factor(s)            0.162 @ 32°F ( 0° C)
                                    0.173 @ 59°F ( 15° C)
                                    0.103 @ 86°F (30° C)
                                    0.069 @ 113°F (45° C)
                                    0.049 @ 140°F (60° C)

Sound Damping Sheet Installation

Caution: Soundamp E should be stored only in it's original packaging in a horizontal position and must be protected from freezing during storage and after application until thoroughly cured, approximately 24 hours

Step 1:
Preparation: clean surface. Be sure to remove all oil, loose paint, scale, dirt or other foreign material. Soundamp E should only be applied when the ambient and substrate temperature is 70° to 80° F.

Step 2:
Method: Soundamp E should be applied to the surface of the substrate with a roller that can exert pressure to ensure an even bond between the PSA on the damping sheet and the substrate.

Step 3:
Remember During curing the ambient temperature should be between 70° and 80° F. Once curing process is complete both the damping sheet and the PSA adhesive should withstand temperatures between -22° and 248° F.

Step 4:
Sealing: In outdoor applications sealing the Soundamp E is not necessary but may help preserve the damping sheet.

Step 5:
Shelf life: unopened packages should last up to 6 months, if stored between 32° and 86° F.



All Noise Control Facebook
Google Plus All Noise Control
Noise Control WordPress
All Noise Control Pinterest