...
561-964-9360

Acoustical Products Made in USA.

100% Solids Novo-Poxy Epoxy Floor System

A Floor Poxy Epoxy System for Residential, Commercial & Industrial Use.

High Heat / Chemical Resistant Epoxy System

The Floor Poxy Novo-Poxy System is a 100% Solids, multi-functional Novolac epoxy system. It is designed for strong chemical and solvent resistance and constant temperature exposure of greater than 225 ̊F. The LD3770 can withstand a constant immersion of 70% Sulfuric Acid for 90+ days before failure and 50% Sodium Hydroxide immersion for 30 days. It is available pigmented or as a clear coat.

Uses & Recommended Surfaces

For interior use only unless protected by another product with a UV inhibitor such as our aliphatic urethane. Uses include industrial floors in factories, restaurant kitchens, schools, hospitals, food processing, garage floors, dairies and warehouses.

Have an upcoming project?

Explore our gallery

RESOURCES

Product & Download Link

Description

Clear-Sealer-LD-2110-TDS

Water based Epoxy 2:1

Epoxy-LD-25-96-TDS

100% Solid Crack Filler/Patching

LD2009_TDS

Optional: Clear Water Based Epoxy

Life-Deck-7200P-TDS

Optional: Clear water based urethane

Life-Deck-7200P-TDS

Optional: Chemical Resistant Urethane (CRU)

Life-Paint-25-Series-Water-Based-Epoxy-Product-Specification

Optional: Polyurea

Product & Download LinkDescription
25 SeriesWater based Epoxy 2:1
LD-7200100% Solid Crack Filler/Patching
LD-25-96100% Solid Crack Filler/Patching
LD-2110Optional: Clear Water Based Epoxy
LD-2003Optional: Clear Water Based Urethane
LD-2009Optional: Clear Water Based Urethane
LD-2009Optional: Chemical Resistant Urethane (CRU)
LD-2003 Isocyanate – SDSOptional: Chemical Resistant Urethane (CRU)
LD-2009 Resin SDSOptional: Polyurea
LD-2009 Isocyanate – SDSOptional: Polyurea

LD-2003

25 Thin Film System Specification

LD-2009

25 Thin Film System Marketing Brochure [Coming Soon!]

 

Coming Soon! 

Coming Soon! 

LD3770 is a 100% Solids, multi-functional Novolac epoxy system. It is designed for strong chemical and solvent resistance and constant temperature exposure of greater than 225 ̊F. The LD3770 can withstand a constant immersion of 70% Sulfuric Acid for 90+ days before failure and 50% Sodium Hydroxide immersion for 30 days. It is available pigmented or as a clear coat.

Uses for Novolac Epoxy

Some commonly used areas for LD3770 are containment areas, manufacturing plants, mechanical rooms, warehouses, tank linings, where a high level of chemical and solvent resistance is required, commercial kitchens, waste treatment plants, and high-temperature areas of food and beverage processing plants. It can be used as a clear coat over decorative color quartz or mixed with aggregate for use as a mortar for overlays or repairs for concrete.

Floor Poxy Epoxy Novolac Advantages

  • 100% Solids
  • Strong Chemical Resistance
  • Low Odor
  • Superior Adhesion
  • High Heat Resistance
  • High Strength
  • High-Build

Coverage rate for Novolac Epoxy

Coverage will vary depending on condition of surface and desired thickness.

As a Coating: 100-300 sf per gallon

For Epoxy Mortar: 1 gallon of epoxy mixed with 5 gallons of sand will yield approximately 3 to 4 gallons of mortar.

Packaging for Novolac Epoxy

1 1/2 gallon kits 15 gallon kits

Color Coatings for Floor Poxy Epoxy Novolac

  • Clear (slightly amber)
  • Gray
  • White
  • Black

How to prep Floor Poxy Epoxy Novolac

  1. Concrete must be clean, dry, and free of grease, paint, oil, dust, curing agents, or any foreign material that will prevent proper adhesion. The concrete should be at least 2500 psi and feel like 30-grit sandpaper. The concrete should be porous and be able to absorb water.
  2. A minimum of 28 days cured is required on all concrete. Relative humidity in the concrete floor slab should be below 80% (per ASTM F-2170). Before starting flooring work, test existing concrete slab to make sure there is no efflorescence or high levels of alkalinity. Alkalinity refers to a high pH reading which means the floor is not neutral.
  3. A high alkaline environment can cause salts to creep up through the cement called efflorescence. These salts have a tendency to prevent or destroy the bonding of coatings to the concrete. The most common form of testing is the use of a wide-range pH paper or tape. Make sure the floors pH reading ranges between 5-9 to ensure adhesion.
  4. The testing of concrete for alkalinity can show the amount of alkalinity only at the time the test is ran, and cannot be used to predict long-term conditions.

Novolac Epoxy Prep Cont…

  1. Calcium chloride tests should be conducted to determine if the concrete is sufficiently dry for an epoxy flooring installation. The calcium chloride tests should be conducted in accordance with the latest edition of ASTM F 1869, Standard Test Method for Measuring Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride.
  2. When running a calcium chloride test, it is important to remove any grease, oil, curing agents, etc. so accurate readings can be obtained. A rate of 4.5lbs/1000 ft2/24hr period or less is an acceptable amount of vapor pressure for an epoxy flooring installation. If the reading ranges from 4.5lbs to 15lbs, a moisture barrier system such as our Floor Poxy Epoxy LD1200 Vapor Seal can be installed to reduce the emissions.
  3. Failing to adhere to these strict guidelines can result in product delamination, discoloration, blistering, or all together failure of the coating system. Testing is the responsibility of the applicator. Life Paint bears no responsibility for failures due to any of the above conditions.

Surface Preparation for Floor Poxy Epoxy Novolac

Over Concrete Surfaces:

Shotblasting is the preferred method for preparing the concrete. In some cases you may prepare by acid etching, floor scrubbing with a nylogrit brush and waterblasting to achieve a clean and uniform surface that feels like 50 grit sandpaper.

If acid etching is done, be sure to properly etch and then adequately neutralize by scrubbing and rinsing several times followed by power washing. Prepare the surface so that the product will soak in and properly bond.

Over existing Epoxy

Sand the surface with a floor buffer and 50 grit sand paper, remove debris and wipe with denatured alcohol just before new application.

Mixing Floor Poxy Epoxy Novolac

As a Coating

Premix each component separately. Mix 2 parts A with 1 part B, by volume, into a clean container. Mix thoroughly with a low speed (400-600 rpm) drill motor for 3-4 minutes.

Make sure to scrape the sides and bottom of the container during mixing. The product will thin with acetone. If so, apply thin enough to allow solvent to escape (minimum 300 sf per gallon). After mixing is completed, remove from container within 5 minutes as epoxy will begin to generate heat. Spread immediately onto the floor, as product is spread out you will have longer working time (10-15 minutes at 70 ̊F).

For a Epoxy Mortar

Mix 2 to 5 parts of a washed and kiln dried aggregate, by volume, to 1 part of mixed LD 3770 and mix until uniform in consistency.

Application of Floor Poxy Epoxy Novolac

Primer for Epoxy Novolac:

Prime the surface using LD1200, or LD12Vapor Seal epoxies (Read individual product information sheets). The LD3770 may also be used as a primer when thinned 10-20% with acetone. Primer coat should be applied thinly and worked into the surface to help seal avoid pin holes.

As a Coating:

  • Apply LD3770 within 24 hours after the primer coat. Immediately after mixing, spread a strip of the batch onto the surface along the edges where it will be “cut in” using a brush.
  • Pour the remaining material near the “cut in” area and spread evenly using a trowel or squeegee and back roll using a 1/4” nap non-shedding roller. A notched trowel or squeegee will help regulate the thickness and a porcupine roller will help to release trapped air and minimize bubbles.
  • Depending on the look, thickness, chemical and abrasion resistance desired, 1 to 2 coats may be applied. A non-skid surface can be achieved by broadcasting and/or back rolling a washed and kiln dried aggregate into the coating.

For an epoxy mortar:

  • Prime the surface using LD1200, or LD12 Vapor Seal epoxies (Read individual product information sheets). While tacky, apply the prepared epoxy mortar using a trowel.
  • If waiting longer, make sure to broadcast silica sand into wet primer coat (1lb/2sf) to ensure intercoat adhesion. Make sure to sweep or blow off excess sand before application of the mortar coat.

Limitations for Floor Poxy Epoxy Novolac

  1. Do not apply at temperatures below 50 ̊F or above 95 ̊F.
  2. After mixing completely (3-4 minutes remove from mixing container an apply to floor)
  3. Do not apply over concrete with Moisture Vapor Emissions above 4.5lbs/1000 ft2/24hr period (see LD12Vapor Seal specification)
  4. For interior use only unless protected by a UV resistant coating.
  5. 4” Concrete must be cured for a minimum of 28 days. • Solvents added to thin such as acetone will make product combustible or flammable in which case be aware of sparks or open flame.
  6. For the addition of a solvent, the products must be applied thinly to allow the solvent to escape or proper curing will to occur.

Clean Up

  • Uncured material can be removed with a solvent. Cured material can only be removed mechanically.

Applications

Advantages

System Steps

RECOMMENDED EPOXY SYSTEMS

25 THIN FILM

SOLUTIONS:

Basements, Garage Floors, Interior Concrete Floors, Showrooms, Factories & Warehouses, Industrial Floors

INDUSTRIES:

Community Planning, Educational Institutions, Parks & Recreation, Retail Stores & Outlets, Restaurants & Kitchens, Automotive

100% SOLIDS THIN FILM

SOLUTIONS:

Community Planning, Educational Institutions, Parks & Recreation, Retail Stores & Outlets, Restaurants & Kitchens, Manufacturing & Packaging Facilities, Automotive, Healthcare, Pharmaceutical

INDUSTRIES:

Basements, Garage Floors, Interior Concrete Floors, Showrooms, Factories & Warehouses, Industrial Floors

VAPOR SEAL THIN FILM

SOLUTIONS:

Garage Floors, Interior Concrete Floors, Showrooms, Factories & Warehouses, Industrial Floors

INDUSTRIES:

Community Planning, Educational Institutions, Parks & Recreation, Veterinarian Facilities & Kennels, Retail Stores & Outlets, Restaurants & Kitchens, Manufacturing & Packaging Facilities, Automotive, Wine Cellars, Healthcare, Pharmaceutical

100% SOLIDS PAINT CHIP FLOOR

SOLUTIONS:

Basements, Garage Floors, Interior Concrete Floors, Showrooms, Factories & Warehouses, Industrial Floors

INDUSTRIES:

Community Planning, Educational Institutions, Parks & Recreation, Retail Stores & Outlets, Restaurants & Kitchens, Automotive

25 THIN FILM

SOLUTIONS:

Basements, Garage Floors, Interior Concrete Floors, Showrooms, Factories & Warehouses, Industrial Floors

INDUSTRIES:

Community Planning, Educational Institutions, Parks & Recreation, Retail Stores & Outlets, Restaurants & Kitchens, Automotive

100% SOLIDS THIN FILM

SOLUTIONS:

Community Planning, Educational Institutions, Parks & Recreation, Retail Stores & Outlets, Restaurants & Kitchens, Manufacturing & Packaging Facilities, Automotive, Healthcare, Pharmaceutical

INDUSTRIES:

Basements, Garage Floors, Interior Concrete Floors, Showrooms, Factories & Warehouses, Industrial Floors

VAPOR SEAL THIN FILM

SOLUTIONS:

Garage Floors, Interior Concrete Floors, Showrooms, Factories & Warehouses, Industrial Floors

INDUSTRIES:

Community Planning, Educational Institutions, Parks & Recreation, Veterinarian Facilities & Kennels, Retail Stores & Outlets, Restaurants & Kitchens, Manufacturing & Packaging Facilities, Automotive, Wine Cellars, Healthcare, Pharmaceutical

WATER BASED COLOR QUARTZ FLOOR

SOLUTIONS:

Garage Floors, Interior Concrete Floors, Showrooms, Factories & Warehouses, Industrial Floors

INDUSTRIES:

Community Planning, Educational Institutions, Parks & Recreation, Storage Facilities, Retail Stores & Outlets, Restaurants & Kitchens, Healthcare, Pharmaceuticals, Hospitality, Commercial Office

100% SOLIDS COLOR QUARTZ FLOOR

SOLUTIONS:

Garage Floors, Interior Concrete Floors, Showrooms, Factories & Warehouses, Industrial Floors

INDUSTRIES:

Community Planning, Educational Institutions, Parks & Recreation, Storage Facilities, Retail Stores & Outlets, Restaurants & Kitchens, Manufacturing & Packaging Facilities, Healthcare, Pharmaceuticals, Hospitality, Commercial Office

NOVO-POXY SYSTEM

SOLUTIONS:

Garage Floors, Interior Concrete Floors, Showrooms, Factories & Warehouses, Industrial Floors

INDUSTRIES:

Community Planning, Educational Institutions, Veterinarian Facilities & Kennels, Parks & Recreation, Storage Facilities, Restaurants & Kitchens, Manufacturing & Packaging Facilities, Automotive, Healthcare, Pharmaceuticals, Hospitality, Commercial Office

LIQUID METALLIC MARBLE

SOLUTIONS:

Garage Floors, Interior Concrete Floors, Showrooms, Factories & Warehouses, Industrial Floors

INDUSTRIES:

Community Planning, Educational Institutions, Parks & Recreation, Retail Stores & Outlets, Restaurants & Kitchens, Manufacturing & Packaging Facilities, Automotive, Hospitality, Commercial Office

100% SOLIDS MORTAR EPOXY

SOLUTIONS:

Garage Floors, Interior Concrete Floors, Showrooms, Factories & Warehouses, Industrial Floors

INDUSTRIES:

Educational Institutions, Parks & Recreation, Storage Facilities, Manufacturing & Packaging Facilities, Restaurants & Kitchens, Healthcare, Pharmaceuticals

Talk to a Specialist

Our consultants are trained to answer any question,
construct a solution to your noise pollution problem

Call us

Cell: 561-964-9360
Fax: 1-800-363-1593

ACOUSTICAL BLANKETS

Danielle J.

5/5

Wouldn’t use anything else

Request a Quote