Noise Control "How Tos" & Installation Articles..

These ceiling tiles are designed to be dropped into an existing ceiling grid system. When it is necessary to cut the tiles to fit existing openings, follow the following steps:
Step 1.
Measure your ceiling grid opening. Be sure to measure from inside to inside, then deduct 1/8″ from your results. This will allow the tile to slip into the grid with ease.

Step 2.
Lay the tile on a clean and smooth surface and mark off your measurements on the back of the tile. Use a straight edge(preferably metal) as a guide for a sharp razor tool. Cut the tile, a couple of passes maybe required.

Step 3.
Drop the cut tile into your grip system.