Blog

Acoustical Banners & Panel Systems for Sound Transmission Control

These ANC sound absorption acoustical banners shall be located and spaced as detailed on reflected ceiling plans and/or detailed on the interior elevation drawings and as indicated on the room finish schedule

 Physical Properties

• Cloth Cover: Aluminum vinyl coated fiberglass cloth
  
• Thickness: 1″ thick (4′ x custom length)
  
• Width: 48″ (or custom)
  
• Length: Custom
  
• Geometric Shape: Rectangular
  
• Surface Finish : PVC Perforated One Side
  
• Core: 1# fiberglass
  
• Fire Rating: passes ASTM E84 Class I fire rating passes FMVS S .302 and FAR 25.283
  
• Flame Spread: 17.66
  
• Edge Construction: Heat Sealed
  
• Subsection Provision : (washer plates) (stiffeners) (cable)
  
• Incombustibility : Class “A” per ASTM E-84 25/0/50
  
• Acoustical Performance: 0.70 N.R.C.
  

Acoustic Banner Direct Attachment to

Beam or Bar Joists  

Figure 4    Beam Attachment  

Beam Clamps can be attached securely Acoustical Noise Absorber Banners And Panel Systems with bolts to the stiffener/gripper. When Beam Clamp is attached to stiffener/gripper, attachment is made on the same side of beam as Lapendary Panel and must be securely bolted on to the beam.

Acoustic Banner Direct Attachment to Beam or Bar Joists

Figure 5    Bar Joist Attachment

Beam Clamps can be attached securely with Acoustical Noise Absorber Banners And Panel Systems bolts to the stiffener/gripper. When Aircraft Cables on ends with Beam Clamps to stiffener/gripper, attachment is made on the other side of bar joist or beam of Lapendary Panel and must be securely bolted on to the bar joist.