biggest noise problems, can be treated with just a simple solution. Leighton McGin Company had similar problems. Noise was traveling through one door way

HHI Corporation contacted All Noise Control; they needed a resolution to a noise pollution that would prevent echoing within the room, also to prevent vibration noise troubles in large place as well with noise going out. The main objective of the project was to avert the echoing, and to prevent sound exposure noises within the project.

We have listed below some of the most common questions and their answers in hopes of providing basic knowledge related to noise, and noise control products and systems.
What is Noise?
Noise is defined as unwanted sound. Unwanted sound can be hazardous to your hearing or can be simply disturbing, interfering or annoying. Sound does not have to be loud to be unwanted.

SoundBreak Gypsum Board – ½” Thick

ACOUSTICALLY ENHANCED SOUNDBREAK GYPSUM BOARD INSTALLATION

A. General: Install in accordance with manufacturer recommendations and GA-214.

To understand how different types of soundproofing foam can be used, one must first understand how sound waves and noise levels are measured. The ability of an object to block sound is measured by its Sound Transmission Coefficient (STC) rating, which can range from 0 to 100. A wall with a STC rating of 50, for example, means that noise levels on one side of the wall are 50 decibels higher than on the other side. Sound absorption is measured using the Noise Reduction Coefficient (NRC), which generally falls between 0 and 1. This number shows the amount of sound absorbed by an object, and the higher the NRC value, the more noise is absorbed.

A & C Mold Company contacted All Noise Control and after discussing their application All Noise Control provided, A & C Mold Company with a solution suggesting using the acoustical product ANC-AB12 that would help them with soundproofing issues they are experience.

The main goal for All Noise Control was to find a product that applied to their requirements. All Noise Control introduced Aggressive Tooling, Inc with the Acoustic Ceiling Baffles. This product would help echo-like force and ambient noise levels in an upper area. This product is proven and effective to sound absorber and helps reduce reverberation. It is very inexpensive, the submission to install are simple, maintains as well.

All Noise Control knew that our cost effective wall panels were the ideal product and due to the small space and the conscious effort to reduce as much reflective surface as possible, recommended that wall panels be fit inside the room to the ceiling. There were orders and manufactured to their needed specs and fit snugly up to the drop ceiling eliminating any potential for noise reflection.

A & C Mold Company contacted All Noise Control and after discussing their application All Noise Control provided A & C Mold Company with a solution suggesting using the acoustical product ANC-AB12 that would help them with soundproofing issues they are experiencing.