Pipe & Duct Wrap

Pipe & Duct Wrap

For HVAC Noise Control, Sound Barriers, Absorber-Barrier Combination, Mass Loaded Vinyl.
Duct and Pipe Wrap is used to wrap duct work and pipes to dramatically reduce the amount of noise transmitting through the walls or casing of duct work, steel or PVC piping, valves, sheet metal enclosures, plenums, HVAC units, and fans.

Pipe & duct lagging is easy to cut, trim and install on any site and is ideal for industrial and residential noise alike. Simply wrap this acoustical pipe barrier around any cylinder containing noisy air or liquid flow, and tape the seams shut: you will see 15 to 20-decibel level drop in unwanted noise.Size: 54″ X 30’ 1″ thick.

Duct Lagging Features
  • STC ratings fo 26-30
  • Easy to cut and install
  • Accepts matching tape
  • Good corrosion resistance
  • Passes FMVSS 302, UL-94
  • High & Low-Temperature Applications
  • Quilted fiberglass decoupler available
  • Installation Instructions: 

    Use tape or clamps to affix the duct lagging material around the circumference of your ductwork or piping. Ask us about a mylar matching tape available to disguise the seams. This is sold in 54″ X 30 ft. roles as an add-on product to the duct wrap. Simply wrap standard pipes or vents with this material. Cut to fit and wrap with matching tape. Custom wrap sizing is available upon request. Size: 4’ X 4’ standard.

    Acoustical lagging is the same product as above with a one-inch thick quilted fiberglass insulation bonded to the back of the barrier. This quilted fiberglass layer acts as a decoupler/sound absorber to improve overall noise reduction performance, as well as to offer thermal insulation (R-value = 5_. This version allows one-stop installation of the acoustical/thermal insulation layer and noise barrier.

    This lagging is loaded vinyl noise barrier featuring a reinforced-foil facing (aluminum faced mylar) which readily accepts a matching tape. It is supplied in 4′ wide rolls, 30′ or 60′ long. Often specified or used when the duct or pipe is already wrapped with standard insulation


    This lagging is the same product as above except with a two-inch thick quilted fiberglass decoupler/absorber. This increases noise reduction performance even higher, especially for low-frequency noise problems. This version also improves the R-value to 9.

    Our Gallery
    Request A Quote

    All Noise Control

    2731 Vista Parkway # D-6
    WPB, Florida 33411
    [email protected]

    Our engineers will help with any acoustical designs & solutions, feel free to contact us for a free quote.

    All Products Made In USA.