Centre Street System contacted All Noise Control to help solve the noise control issues in their office located Brooklyn, NY. Once discussing their application All Noise Control provided Centre Street System with a product that was right for their office. The product that was introduced to them was, ANC- AB2-1 which is an 1″ Acoustical Blanket .Typically used as a sound absorption panel when you are trying to reduce the sound waves or reverberant noise energy within a piece of equipment, a room or a building.

While the Anc-3000 Wall panel is our standard noise absorption panel, it’s a perfect retrofit for virtually any application that is not in the path of high abuse areas. The rigid fiberglass fabric wrapped panel can be use aesthetically to absorb sound and significantly reduce and shorten the echo in rooms with substantial volume. Besides the selection of Guilford of Main colors, designer and customer specified fabrics are available for ordering.

Material typically required to complete installation: ANC-AB12, self-tapping screws or nails appropriate for substrate, or other framing material (optional)
1. Determine the area to be covered.
2. If the material is provided in bound pieces (no grommets or Velcro along any edge)
– Using a self-tapping screw that is appropriate for the substrate screw directly through the ANC-AB12 material into the wall or framing material.
– You may use a washer, between the screw and the ANC-AB12, to help secure the material in place

GE Aviation contacted All Noise Control to help them solve noise control issues in their Plant located in Mcallen, TX. After discussing their application All Noise Control provided GE Aviation with a solution of ANC-AB12 to block and absorb noise coming from their mechanical equipment and through several openings.

Waste Water Treatment Plant contacted All Noise control to reduce noise generated by operation of three large (600 H.P…) Centrifugal Turbo-Air blowers at a Waste Water Treatment Plant.

Manufacturing Facility contacted All Noise control to Reduce noise levels generated by a Sweco deburrer that was operating at 85 dB (A) while maintaining maximum accessibility.
Due to the close proximity of the deburrer and other machinery to the main aisle of the manufacturing facility, reduce noise levels as much as possible along the main aisle by individually treating each piece of equipment. Maintain complete uninhibited accessibility for loading and unloading the deburrer.

The Problem….
US Coast in Kodiak, Alaska called All Noise Control to help them resolve their noise control issues with noisy office at their Pacific Alaska Freight Ways office.
The Solution…..

Floating floors refer to installing an isolated floor from the framing or structure in order to reduce the resonant vibration energy within the wall or ceiling construction. By installing floating floors you are reducing structure borne or impact noise, such as footfalls, cupboards and doors shutting etc., that are being transmitted through a building’s structure. This type of floor soundproofing is referred to as STC (Sound Transmission Classifications) and IIC Ratings (Impact Isolation Ratings).

The Froggtown Inn & Acres Restaurant keeps things quiet and quaint
Steven Warren from Froggtown Inn & Acres Restaurant contacted All Noise Control with a typical restaurant noise issue. A quiet, quaint and relaxing environment was disrupted by travelling conversations and the going on that happen in the general hustle of any restaurant. Dishes clanking, conversations carrying, doors opening and closing, kitchen noise, all lending to a interrupted dining experience.

Acoustic Blanket Non-Reinforced Standard with full width clear vinyl view windows form a three-bay acoustical curtain enclosure at a Ford Motor Company plant.